background image

Before Installation

 

It is very important to mount the equipment in a suitable cabinet or on a stable surface.

Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.

Unpacking

 

The equipment comes with the standard parts shown in package content. Check and make sure they are 
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

 

How To Clean Your LCD Monitor

 

Caution :

 

To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.

Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.

Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.

Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

 

To clean your LCD safely, pleas e follow these steps :

 

1  

Dis connect the power cord.

 

2  

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

 

Cleaning Tough Marks and Smudges

 

To rem ove tough m arks and smudges, please follow these steps :

 

1  

Disconnect the power cord.

 

2  

Spray a small amount of non-abrasive cleanser on a microfiber cloth.

 

Cauti on : Do not spra y or apply any liquids directl y onto the monitor. Always apply the solution to your 
microfiber cloth first, not directly on the parts you are cleaning.

 

3  

Gently wipe the surface. Use as little pressure as possible.

 

4  

W ait until your monitor is com pletely dry before plugging it in and powering it up.

 

Summary of Contents for MKD6017U
















Reviews: