Chapter 4 Award BIOS Setup
A brief introduction of each setting in the BIOS FEATURES SETUP
program is given on the next few pages.
VIRUS WARNING :
This item allows you to choose the Virus Warning feature for IDE Hard Disk
boot sector protection. If this function is enabled and someone attempt to
write data into this area, BIOS will show a warning message on screen and
alarm beep.
CPU INTERNAL CACHE:
EXTERNAL CACHE:
These two categories speed up memory access. However, it depends on
CPU/chipset design.
CPU L2 CACHE ECC CHECKING:
When you select Enabled, memory checking is enable when the external
Cache contains ECC SRAMs.
QUICK POWER ON SELF-TEST:
This item allows you to speed up Power On Self Test (POST) after power-up
the computer. When enabled, the BIOS will shorten or skip some check items
during POST.
FIRST/SECOND/THIRD/OTHER BOOT DEVICE:
The BIOS attempt to load the operating system from the devices in the
sequence selected in these items.
SWAP FLOOPY DRIVE:
This field is effective only in systems with two floppy drives. Selecting
Enabled assigns physical drive B to logical drive A, and physical drive A to
logical drive B.
BOOT UP FLOPPY SEEK:
You may enable / disable this item to define whether the system will look for
a floppy disk drive to boot at power-on, or proceed directly to the hard disk
drive.
BOOT UP NUMLOCK STATUS:
Select power on state for NumLock.
GATE 20A OPTION:
PC 1060 USER MANUAL
Page: 4-9
Summary of Contents for PC 1060
