Chapter 4 Award BIOS Setup
ONBOARD SERIAL PORT 1:
ONBOARD SERIAL PORT 2:
ONBOARD SERIAL PORT 3:
ONBOARD SERIAL PORT4:
Select an address and corresponding interrupt for the first and second serial
ports.
ONBOARD PARALLEL PORT:
This item allows you to determine access onboard parallel port controller with
which I/O address.
PARALLEL PORT MODE:
Select an operating mode for the onboard parallel (printer) port. Select
Normal, Compatible,
or
SPP
unless you are certain your hardware and
software both support one of the other available modes.
ECP MODE USE DMA:
Select a DMA channel for the parallel port for use during ECP mode.
PARALLEL PORT EPP MODE:
Select EPP port type 1.7 or 1.9.
IO CHANNELCHECK NMI :
This field allows you to enable or disable IO channel check NMI. Before
selecting this function, the user should check first that NMI function is enabled as
described in chapter 2 (
Reset/NMI/Clear Watchdog Selection
).
PC 1060 USER MANUAL
Page: 4-17
Summary of Contents for PC 1060
