background image

 
 

For details on device operation, refer to the manuals for INS-ZS and INS-ACC standalone modules. 
Instructions and more information also available at www.wsparcie.aco.com.pl

 

 and www.aco.com.pl 

 

 

IMPORTANT!

 When disinfecting panels made of stainless steel, use only alcohol-based cleaners. All 

types of chlorides (which are present in the composition of common cleaners) are harmful to the steel 
surface, because they abrade its natural protective coating and increase the risk of corrosion marks.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

RULES FOR STORING WASTE ELECTRICAL EQUIPMENT 

Waste electrical equipment must not be disposed of with other waste. It should be stored in places designated for this purpose. For this 
purpose, please contact the responsible institutions or companies involved in waste recycling. - Directive 2002/96/EC of 27.01.2003

     

 

ACO Sp. z o.o. sp. komandytowa, 62-002 Suchy Las, ul. Diamentowa 7, tel./ fax 61 843 93 72

 

www.aco.com.pl

 

   

IU0312envA.2145

 

Summary of Contents for INS-ZS-ACC

Page 1: ...s It can directly control external devices such as an E lock reversible E lock output 1 only or an optional relay which can be used to control any other device such as a magnetic e lock a barrier etc 1 INSTALLATION The INS ZSACC box is flush mounted Lead the wires through hole 1 Fix the box with expansion bolts through holes 2 when installing in soft materials such polystyrene fix the box using mo...

Page 2: ...g of both modules for output 1 Both modules running together parallel triggering of both modules for output 2 output 1 operated independently All module outputs operated independently of each other In this case remove the EXTMOD plug and connect the power supply to both modules ...

Page 3: ...tarting especially when opening the E lock Connect the 11 5V AC supply voltage to the 12V terminals and if using a DC power supply unit connect respectively DC of the power supply unit to AC terminals any of the terminals and DC to GND terminals Connect the E lock with no specific polarity to ELOCK terminals 12V and OUT1 or OUT2 if using reversible E lock solder jumper Z4 on the left side of the b...

Page 4: ...leaners are harmful to the steel surface because they abrade its natural protective coating and increase the risk of corrosion marks RULES FOR STORING WASTE ELECTRICAL EQUIPMENT Waste electrical equipment must not be disposed of with other waste It should be stored in places designated for this purpose For this purpose please contact the responsible institutions or companies involved in waste recy...

Reviews: