– 18 –
2. Disassemble the Drive Enclosure
1. Using a Philips screw-
driver, remove the four
screws on the back
panel.
2. Remove the back fascia.
3. Grab the front fascia
and carefully slide out
the Drive/PCB Carrier,
which is attached to the
front fascia.
When handling the Drive/PCB Carrier, never touch the PCB
(printed circuit board). It contains sensitive electronics that
an be easily damaged.
������
�����������������
���������������
�����������������
�����������
Summary of Contents for Enclosure
Page 1: ...Hard Drive For 3 5 IDE hard drives ...
Page 53: ......