background image

–  30  –

Formatting the Drive  

in Windows 2000 or XP

1. Disable any anti-virus software you may have running in 

the background.

2. Double-click on My Computer/Explorer. In the My 

Computer/Explorer window you should see the icon and 
drive letter for the AcomData Drive. (If you are not sure 
which drive letter represents the AcomData Drive, turn it 
off and see which one of the icons disappears. Then turn 
on the Drive and wait for the drive letter to reappear.)

3. Right-click on the drive letter and select Format… in the 

pop-up menu. The Format dialog box will appear.

4. Under Capacity, verify the Drive capacity. It should be 

close to the stated capacity of your Drive in gigabytes.  

5. In the File System pop-up menu, select NTFS. Do not 

select FAT32 as you cannot format the Drive using the 
FAT32 file system on Windows 2000 or XP. 

6. In the Allocation unit size pop up, select “Default alloca-

tion size.”

6. In the Volume label field, type in a name for the Drive. You 

should give the drive a unique name that will allow you 
to easily distinguish it from other hard drives or storage 
devices.

7. The default formatting option is Full format, however 

under Format options you can select Quick Format. A 
Full format will take about 30-90 minutes. A Quick format 
will take just a few minutes, but will do less verifying of 
the Drive than a Full format will. Do not check Enable 
Compression.

8. Click Start. Once the format process is complete, the Drive 

will be ready to use.

Summary of Contents for Enclosure






















































Reviews: