Battery to Charge Controller
Overall rendering
The battery(s) must first be connected to the charge controller before proceeding to any
other connections. Most MPPT Controllers have automatic battery voltage detection, and
the controller must detect what voltage level it will be charging at.
Use a screwdriver to rotate and unscrew the "o" port of the MPPT controller, so that the
positive red line of the battery line is connected to the positive pole of the MPPT charging
controller, and the negative black line of the battery line is connected to the negative pole
of the MPPT charging controller.Put the metal wafer lasso of the red line of the positive
electrode of the battery on the positive electrode of the battery, and the metal wafer lasso
of the black line of the negative electrode of the battery on the negative electrode of the
battery.At this point, the connection between the battery and the MPPT charging controller
is completed, and the screen of the MPPT charging controller will display the battery
voltage information.
Email: Sales@ACOPower.com Call: (626) 575-7722 Web:www.acopower.com
Address:4120 Valley Blvd, Walnut CA 91789, USA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
