www.ACOPower.com
KIT-HYS200MB
4120 Valley Blvd Walnut, CA 91789, USA
+1-626-737 1140
Power Your Green Life!
Fault Indication
Status
Icon
Description
Battery over
discharged
Battery level shows empty, battery frame blink,
fault icon blink
Battery over
voltage
Battery level shows full, battery frame blink, fault
icon blink
Battery
Overheating
Battery level shows current value, battery frame
blink, fault icon blink
Load failure
Load overload
①
,Load short circuit
Load mode setting
Operating Steps:
Under load mode setting interface, press
SET
button and hold on 5s till the number
begin flashing, then press
ME
NU button to set the parameter, press S
E
T button to
confirm.
Timer 1
Timer 2
Ligh
t ON/OFF
Disabled
Load will be on for 1 hour
since sunset
Load will be on for 1 hour
before sunrise
Load will be on for 2 hours
since sunset
Load will be on for 2 hours
before sunrise
～
Load will be on for 3
～
13
hours since sunset
～
Load will be on for 3
～
13
hours before sunrise
Load will be on for 14 hours
since sunset
Load will be on for 14
hours before sunrise
Load will be on for 15 hours
since sunset
Load will be on for 15
hours before sunrise
Test mode
Disabled
Manual mode(Default load
ON)
Disabled
NOTE: Please set Light ON/OFF, Test mode and Manual mode via Timer1. Timer2
will be disabled and display "2 n".
Battery Type
Operating Steps
Under Battery Voltage interface, press S
ET
button and hold on 5s then enter into the
interface of Battery type setting. After choosing the battery type by pressing
ME
NU
button, waiting for 5s or pressing
SET
button again to modify successfully.
