2-22
2-22
2-22
2-22
2-22
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Onboard Serial Port1
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: 3F8/IRQ4
(default), Auto, (2F8/IRQ3),
(3E8/IRQ4), (2E8/IRQ3), Disabled.
Onboard Serial Port2
Select an address and corresponding interrupt for the first
and second serial ports.
The Choices: 2F8/IRQ3
(default), Auto, (3F8/IRQ4),
(3E8/IRQ4), (2E8/IRQ3), Disabled.
UART Mode Select
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Normal
(default), IrDA, SCR, ASKIR.
UR2 Duplex Mode
This item allows you to select which Infra Red(IR)
function of the onboard I/O chip you wish to use.
The Choices: Half
(default), Full.
ECP Mode Use DMA
The Choices: 3
(default), 1.
Onboard Parallel Port
This item allows you to select the I/O address with which
to access the onboard parallel port controller.
The Choices: 378/IRQ7(default)
, 278/IRQ5, 3BC/IRQ7,
Disabled.
Parallel Port Mode
SPP (default)
Using Parallel port as Standard
Parallel Port.
EPP
Using Parallel port as Ex-
hanced Parallel Port.
ECP
Using Parallel port as Ex-
tendedCapabilites Port.
