2-35
2-35
2-35
2-35
2-35
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
Chapter 2 BIOS Setup
¡·
¡·
¡·
¡·
¡·
Figure 12. Set Supervisor / User Password
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Standard CMOS Features
Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PNP/PCI Configuration
Save & Exit Setup
PC Health Status
Exit Without Saving
Esc : Quit F9 : Menu in BIOS
←→↑↓
: Select Item
F10 : Save & Exit Setup
Time , Date , Hard Disk Type ...
Enter Password:
When you select this function, the following message will
appear at the center of the screen to assist you in creating a
password.
Enter Password
Type a password, up to eight characters, and press <Enter>.
The password you type now will clear any previously entered
password from CMOS memory. You will be asked to
confirm the password. Type the password again and press
<Enter>. You may also press <ESC> to abort the selection
and not enter a password. To disable the password, just press
<Enter> when you are prompted to enter a password. A
message will confirm that you wish to disable the password.
Once the password is disabled, the system will boot and you
can enter setup freely.
2.12 Set Supervisor / User Password
