Installing the EZ-RC™ Remote Control Setup Wizard
11
Ins
talling
5
Connect your remote when prompted
If you see this error message...
You need to change your ActiveX settings in Internet
Explorer for the EZ-RC™ Remote Control Setup Wizard to
work.
To change settings ActiveX settings:
1. Click OK in the “Missing necessary software...” dialog box.
2. Locate the yellow warning bar just above the AR remote control setup wizard page (shown
below).
3. Click where it says “click here” on the yellow warning bar to change the ActiveX setting.
4. Click the Connect button again at the bottom of the screen.
Why ActiveX controls are necessary
The EZ-RC™ Remote Control Setup Wizard uses ActiveX controls to give you an enhanced
user interface, with straightforward access to the remote’s advanced features and seamless
integration with the remote itself.
How do I know if the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
Use the USB cable that came with your
remote to connect it to a USB port on your
computer.
If you see a progress bar in
the corner of the screen...
To get started, please
connect the remote control
to your computer
using the USB cable that was
provided.
When done click
Connect
below.
Welcome
Shannon!
The EZ-RC wizard will now help
you set up your new universal remote control in just
few easy steps.
+
+
-
-
EZ-RC
Please Wait...
Don’t disconnect the remote! The
Xsight™ Plus
is constantly being
updated and improved, to get the latest
codes and provide the most advanced
functionality available.
It means your
remote’s
firmware is
being updated.
Missing necessary software to connect to the
remote control. Please insert the CD-ROM in
your PC and install the software.
OK
Miss
remo
your