Activities
17
A
ctivitie
s
Test the entire activity
The next screen lets you test the “Hello” activity with your entire system.
IMPORTANT:
Make sure all your devices are off before you start. Also make sure your remote is
pointed directly at your home theater. Then press
to begin the test. The screen says
“Sending IR Functions” while the remote is sending the power commands.
Did it work?
If it worked (if your devices turned on):
Reconnect the remote to your PC (see the
heading below).
If it didn’t work:
Make sure your remote is pointed directly at your home
entertainment devices and that there’s nothing obstructing the path, then press
to test the activity again.
IMPORTANT:
Make sure all your devices are off before you
start.
Try several times with the remote in different positions. If it still doesn’t work, go ahead
and reconnect to PC to troubleshoot and correct the activity.
Reconnect the remote to your PC
Once you’ve reconnected the remote, select
Continue
on the EZ-RC™ Remote Control
Setup Wizard screen.
How do I know the remote’s connected?
Look for the green arrow icon in your PC’s status bar.
Main menu
Set up Hello Activity
1 2 3 4 5 6
..........................................................................................................................................................................................................................................................................................................
Cancel
Back
Continue
CH
+
-
Disconnect the remote.
Turn Off the Devices you intend to turn On with this
Activity, or vice versa. Then follow the instructions
on the remote control LCD screen to test the
Activity.
Reconnect remote when finished, then press
Continue
.
Test Activity
Begin Test
Throughout the
Activity test, point
the remote
towards
your devices.
Test Activity
Test Again
Reconnect USB to
verify activity.