background image

3

Unpacking

Getting Started

The 

Xsight™ Uno

 setup has three easy steps to get started:

1.  Install the batteries

 

Remove the battery door from the back of the 

Xsight™ 

Uno

. Insert the batteries provided, matching them to the 

(+) and (-) marks inside the battery case. Then, replace 
the battery door. 

Before you start, make sure you’ve found the following parts included in your 

Xsight™ Uno

 

package:

•  The 

Xsight™ Uno

 remote 

•     4 AAA batteries  

•     1 USB adapter cable

•  CD-ROM 

 

 

•     The Setup Guide

IMPORTANT:

 

Please refer to the Setup Guide for more 

detailed setup information. 

2. Follow the Remote’s On-Screen Setup Routine

  Once the remote has working batteries installed, it’s 

ready to start its setup routine. 

  To start using your remote at any time, simply pick it up. 

The remote’s LCD screen will come on and the backlight 
will illuminate.

  For more information on the 

Xsight™ Uno

 on-screen 

setup routine, see the Setup Guide.

3. Connect to Your PC for Advanced Setup

  Once you’ve set up the remote to operate your devices, 

connect it to your PC to unlock its true potential! The 

Xsight™ Uno

 uses the EZ-RC™ Remote Control Setup 

Wizard website to configure its advanced functionality, 
such as Activities, and Favorites.

  See the Setup Guide for more information on connecting 

the remote to your PC.

Language

English

Español

Deutsch

Summary of Contents for Xsight uno





















Reviews: