Stylus care and maintenance
To obtain optimal sound reproduction, re-
move dust from stylus regularly by using a
small brush.
If the headshell can be easily removed from
the tone arm, we recommend that you turn
the diamond upwards and brush gently
forward in the direction of the diamond tip
along the cantilever.
We do not recommend the use of propyl
alcohol (or other cleaning fluids) for cleaning
the cartridge, as the diamond cement as
well as the suspension system could be
seriously damaged and thereby ruin the
cartridge.
Stylus guard
Remove the stylus guard before use by
holding at the front and rear of the guard
and gently pressing the rear while tilting it
downwards. (fig. 7-8)
Technical Data
MM1
MM2
MM3
Output voltage at 1 kHz, 5cm/sec.
5,5 mV
5,5 mV
5 mV
Frequency range at -3 dB
20-20.000 Hz
20-25.000 Hz
Hz 20-31.000 Hz
Tracking ability at 315 Hz
at recommended tracking force
70 μm
80 μm
80 μm
Compliance, dynamic, lateral
20 μm/mN
20 μm/mN
22 μm/mN
Stylus type
Elliptical
Nude Elliptical
Nude Shibata
Tracking force recommended*
1,8 g(18 mN)
1,8 g(18 mN)
1,5 g (15 mN)
Load resistance*
47 kOhm
47 kOhm
47 kOhm
Load capacitance*
150-300 pF
150-300 pF
150-300 pF
*Recommended
AS-D
ISTRIBUTION
G
MB
H - H
ILLENBRAND
S
TR
. 10 - D-73079 S
ÜSSEN
T
EL
.: +49 7162 9474450 -
INFO
@
AS
-
DISTRIBUTION
.
DE
