ACOUSTIC SOLUTIONS DAB31-A, Instruction Manual

19

 Your Radio must be switched on (not in Standby mode), to change the system settings.

Display backlight timeout

You can adjust the display backlight timeout.  Options of permanently On, 10, 20, 30, 45, 60, 
90, 120, and 180 seconds are available.
Note: An ‘*’ will be displayed next to the current setting. 
In DAB or FM mode:
1.  Press and hold the ‘Menu’ button to enter the menu options.
2.  Use the rotary ‘Tune/Select’ control to scroll to ‘<System>’.  Press the rotary ‘Tune/Select’ 

control to select. 

3.  Use the rotary ‘Tune/Select’ control to scroll to ‘<Backlight>’.  Press the rotary ‘Tune/Select’ 

control to select. 

4.  ‘<Timeout>’ is displayed.  Press the rotary ‘Tune/Select’ control to select. Use the rotary 

‘Tune/Select’ control to scroll through the available backlight timeout options of On, 10, 
20, 30, 45, 60, 90,120 or 180 seconds.  Press and release the rotary ‘Tune/Select’ control 
to select.
When you confirm the backlight timeout, the display returns to ‘<Timeout>’.

You can now use the rotary ‘Tune/Select’ control to scroll and use the same method as you 
did to set the Backlight timeout to change the settings for:
•  Backlight <On level>.  High, Medium and Low settings are available
•  Backlight <Dim level> (Standby mode).  High Medium and Low settings are available. 

Display language 

You can change the display language of your radio, there are 4 options available; English, 
French, German and Italian. 
Note: An ‘*’ will be displayed next to the current setting. 
In DAB or FM mode:
1.  Press and hold the ‘Menu’ button to enter the menu options
2.  Use the rotary ‘Tune/Select’ control to scroll to ‘<System>’.  Press the rotary ‘Tune/Select’ 

control to select. 

3.  Use the rotary ‘Tune/Select’ control to scroll to ‘<Language>’.  Press the rotary ‘Tune/

Select’ control to select. 

4.  Use the rotary ‘Tune/Select’ control to scroll to the language you would like.  Press the 

rotary ‘Tune/Select’ control to select.

5.  Press and release the ‘Menu’ button until you return to the station display.

System settings