©2019 ACP, Inc.
Cedar Rapids, IA 52404
Page 11 of 22
Part No. 20267401
Original Instructions
STYLE 1
Programming
Manual Programming Mode
Allows operator to edit preset programs and/or create new programs for
customized cooking.
Note: Manual Programming must be enabled in User Options
From READY or DOOR OPEN screen:
1.
Press and hold number keypad “3”/ PROGRAM
• Oven will display list of preset program and available locations
•
The first available location will be highlighted. If no locations are available, the
first preset program on the first page will be highlighted.
• Display automatically toggles to the next page of program locations every 2
seconds. Select the START pad to manually toggle to next page.
2. Press number keypad(s) to open the desired program location
• PROGRAM ENTRY screen is displayed.
3.
To edit name:
Press number keypad “0”
• EDIT NAME screen is displayed
• Press number keypads to enter program name.
• Press START/OK keypad to save and return to program entry screen.
4.
To edit cook time
for
Stage One:
Press number keypad “1”
• Press number keypads to enter cook time
• Press START/OK keypad to save and return to program entry screen
5.
To edit power level
for
Stage One:
Press number keypad “5”
•
Press number keypads to enter % microwave power (“1”=10%, “2”=20%,etc.)
For 100% power level, press and hold number keypad “2”/ POWER LEVEL
• Press START/OK keypad to save and return to program entry screen
6.
To save and exit programming mode:
Press START/OK keypad
Manually Programming Multiple Stages
Stage cooking allows consecutive cooking cycles (stages) without interruption.
Up to four different cooking cycles can be programmed
1.
Follow “Manual Programming Mode” steps 1-5 above.
2. Repeat steps 4-5 for each additional stage, substituting corresponding number
keypads for each stage.
Example: For stage two, press number keypad “2” to edit cook time, and press number
keypad “6” to edit power level.
3.
To save and exit programming mode:
Press START/OK keypad
3
1
2
5
4
