Product and Installation Manual: Sentry Barrier TL-4 ThrieBeam System
ACP
| September 2020 |
Page
7
New South Wales
Sydney
02 8708 4400
Victoria
Melbourne
02 8708 4400
Queensland
Brisbane
07 3442 6200
Western Australia
Perth
02 9772 4172
Before Installation
Design, selection and placement of the
Sentry Barrier TL-4 ThrieBeam System
shall be in
accordance with the local Road Controlling A
uthority’s guidelines and as per the details shown in the
construction drawings. Installation shall be in accordance with the installation instructions supplied
for this product.
The
Sentry Barrier TL-4 ThrieBeam System
is an engineered safety device. Before starting
installation ensure familiarity with the m akeup of the system.
Note:
Soil conditions may require a local geotechnical engineer to confirm the soil condition on site met
the required condition described in the manual.
Safety statements
General Safety
➢
All required traffic safety precautions should be complied with. All workers should wear
required safety clothing (examples, but not limited to, include: high visibility vests, steel
capped footwear, gloves etc).
➢
Only authorised trained personnel should operate any machinery. Where overhead
machinery is used, care must be taken to avoid any overhead hazards.
➢
Before drilling or excavation always ensure that the area is clear of underground services.
The appropriate service providers may need to be contacted.
Sentry Barrier TL-4 ThrieBeam System Safety Statements
➢
All installers must be a safe distance from all drilling or excavating machinery operating.
➢
The components are not heavy enough to require specialised lifting equipment (note: check
your local OH&S procedures on lifting weights), but due to the dimensions and bulky nature,
care should be taken when lifting the larger components into position.
➢
Avoid placing hands or fingers in and around moving machine parts when components are
being lifted and manoeuvred into place.
