Multi Variable Air Conditioners WALL Mounted Type Indoor Unit
10
(2)
Let the tubing and cord pass though the piping hole after tied up (refer to Fig .5.6 (d)).
(3)
Hang the claw behind the indoor unit on the pothook on the wall panel, and move the unit
left and right to check if the body is firm.
(4)
Guarantee that the installation height of the indoor unit should be 2.5m above the floor.
Fig 5.6
6 The Best Usage Method
NOTICE !
Do not pour water to unit or clean it by water, otherwise a malfunction or electric shock
may happen.
(1)
Adjust the set temperature properly in proper to prevent electricity wasting. It is better
tocontrol the difference of the indoor and outdoor temperatures within 5°C(41 °F).
(2)
The better effect will be maintained by adjusting the guide louver downward for heating
and horizontal for cooling.
(3)
When the air conditioner is running, don’t open windows or doors for long time, otherwise
the efficiency of unit will be lowered.
(4)
Prevent the cooled air blowing to body directly for long time and making indoor
temperature too low, for it is bad for health.
(5)
Do not mangle the power cord and the communication cord. The damaged power cord
and communication cord can only be replaced by the specified ones.
(6)
This air conditioner cannot be used for drying clothes and refrigerating food, etc..
