11
REVERSING THE DOOR
NOTE:
It is recommended that a
service agent carries out any door
hinge modification at the customers
cost. Any cost or subsequent
damage that is incurred due to poor
modification will not be covered
under warranty.
The side at which the door opens can
be changed, from the right side (as
supplied) to the left side, if required.
Warning! When reversing the door,
the appliance must not be connected
to the mains. Ensure that the plug is
removed from the mains socket.
1. Stand the refrigerator upright.
Open the upper door to take out
all door racks (to avoid damage)
and then close the door.
Remove the door shelf
Tools you will need
Note: If required you may lay the
refrigerator on its back in order to
gain access to the base, you should
rest it on soft foam packaging or
similar maternal to avoid damaging
the backboard of the refrigerator. To
reverse the door, the following steps
are generally recommended.
2. Use a putty knife or thin-blade
screwdriver to prize the screw
hole cover which is at the top
left corner of the refrigerator,
and the upper hinge cover which
is at the top right corner of the
refrigerator.
3. Unscrew the special flange self-
tapping screws which are used
for fixing the right upper hinge
part by a 8mm socket driver or
a spanner (please support the
upper door with your hand when
doing it) .
