6
Troubleshooting
Installation Important!
• For electrical connection carefully, follow the instructions given in this
manual. Unpack the appliance and check if there are damages on it.
• Do not connect the appliance if it is damaged. Report possible damages
immediately to the place you bought It. In this case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to
allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads
to overheating. To achieve sufficient ventilation, follow the instructions
relevant to installation.
• Wherever possible the back of the product should not be too close to a
wall to avoid touching or catching warm parts (compressor, condenser) to
prevent the risk of a fire, follow the instructions relevant to installation.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the
appliance.
Service
• This product must be serviced by an authorized Service Center, and only
genuine spare parts must be used.