Removing the
Glass Assembly
X-FIRE 1200
Ensure the X-FIRE 1200 is allowed to cool before continuing with the following
procedure.
Pull the four hooks shown below towards you and then away from the glass
to release the glass frame underneath the hook.
Lift the glass assembly towards you to clear the locating supports and
place it flat upon some newspaper or a sheet of cardboard to protect your
floor coverings.
Cleaning and Maintenance
8
Removing the
Fascia
X-FIRE 1200
To replace the fascia, line up the four hooks with the matching receptacles on
the fire and push the fascia into place and let it drop down, the fascia should
now be securely in position
The X-FIRE 1200 fascia attaches to the fire by four hooks. To remove the
fascia, simply lift it upwards 15-20mm, and pull towards you. Care should
always be taken when handling the fascia.
Ensure the fascia is allowed to cool before handling.
Annual Servicing
Your X-FIRE 1200 Decorative Gas Fireplace requires that annual service
checks be carried out by a Registered Installer to ensure that it will continue to
operate in a safe manner.
Please ensure that you schedule annual service checks for your X-FIRE 1200
with your local Registered Installer or service agent.
X-FIRE 1200
