background image

Warranty Certificate  
 
The  specifications  within  this  document  are  provided  for  information 
purposes only and are under no circumstances binding. 
 
With  the  aim  of  constantly  improving  our  products,  all  modifications 
considered necessary may be made without notice.  
 
Our appliances are guaranteed against faults and hidden defects subject 
to the following conditions: 
 

 

The  appliance  must  have  been  installed  by  a  registered  competent 
installer or inspected by local authority Building Control 

 

The appliance must be installed and operated in accordance with our 
instruction manual 

 

The  guarantee is  for  a  period of  5  years  on  the appliance body  from 
the date of purchase  

 
The  following  components  are  considered  as  consumable  components 
and are excluded from the guarantee: 
 

 

Grates  

 

Rope seals 

 

Ashpan  

 

Internal vermiculite panels  

 

Glass  

 

Baffle plates 

 
Your statutory rights are not affected by this warranty. 
 
 

In the event of a warranty claim, please return the form overleaf to ACR 

Heat Products Ltd, Unit One, Weston Works, Weston Lane, Tyseley, 

Birmingham, B11 3RP, UK. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Astwood AW1MF














Reviews: