background image

ACR Systems Inc. warrants the hardware to be free from defects in workmanship and
components provided they are not abused or subjected to detrimental conditions. Refer to
the warranty information included with your logger for details.

Software is warranted for one year from the date of purchase, to operate in accordance
with its programmed instructions. It is not warranted to be error-free. If the product does
not perform in accordance with this Limited Warranty, ACR will at its discretion, either
repair or replace the product free of charge. There will, however, be a charge for freight
and Canadian Customs clearance (if applicable). Any replacement hardware or software
will be warranted for the remainder of the original warranty period. To the maximum
extent permitted by applicable laws, ACR Systems Inc. disclaims all other warranties,
either expressed or implied, including but not limited to, implied warranties of fitness for a
particular application. In no event shall ACR Systems Inc. be liable for any
inconveniences, loss, damages, etc., whatsoever arising out of the use of this product.

ACR's policy is not to proceed with any repairs or replacement unless first discussed with
ACR's Technical Support Analysts and an RMA (Return Material Authorization) number is
issued.

LIMITED WARRANTY

www.

GlobalTestSupply

.com

Find Quality Products Online at:

sales@GlobalTestSupply.com

Summary of Contents for 01-0194






















Reviews: