36
address 65535; and so on
7-12
0x1406-0x140B
Switch record 2. Please refer to switch record 1
13-18
0x140C-0x1412
Switch record 3. Please refer to switch record 1
19-24
0x1413-0x1419
Switch record 4. Please refer to switch record 1
25-30
0x141A-0x142F
Switch record 5 Please refer to switch record 1
31-36
0x1430-0x1435
Switch record 6 specific register meaning can refer to
switch record 1
By analogy, there are 600 switch records
8.
Common fault analysis and troubleshooting
If the instrument operation indicator and screen are not bright, please check whether the power
supply is connected to AC220V, and then check whether the ALIBUS port is short circuit.
The data cannot be read through the RS485 interface (ModBus _ RTU) after power-on, please check
whether the address and the port rate are consistent.
9.
matters need attention
Before using the product, please check whether the appearance is in good condition, and find
the seller in time if it is damaged.
Connect the wiring according to the instruction manual. Check the wiring to ensure that the
wiring is correct.
After connecting the product to the bus, make sure the operating indicator is normal. Operation
the programming key to ensure that the key is stuck and the programming light is normal.
Product installation and replacement to ensure that it is operated under power failure
condition.
The product can not directly replace the micro circuit breaker and other protection components.