ASSEMBLING THE ACROBAT POOL CLEANER
INSTALLING THE ACROBAT POOL CLEANER
1. Place the inner lip of the Disc onto the Flexi Foot pad flange and peel over
until Disc is secure between the flange and lip of the Flexi Foot pad.
2. The fins of the Disc and the word "TOP" should face the float arm.
3. Unscrew the threaded Handnut and slide the Bumper ring over the back of
the Acrobat’s main body.
4. Screw the Handnut back into place and this will secure the Bumper ring in
place.
5. Attach the Hoses to thick tube of main body at the opposite end to the hand
nut, push hose on firmly.
1. Connect Acrobat machine to your hoses, sufficient hose should be installed for
the hose to reach the furthest place from the skimmer box plus one length of
hose.
2. Gently place machine in the water, this will let the unit gradually release air
and sink to the pool floor.
3. To enable all the air to be driven from the unit, place the last pipe on your
return water inlet while your pool pump is running to fill the hoses and
acrobat unit with water and allow it to sink.
4. Attach the Adjustable control valve to the weir, with arrow in direction of
water flow, use weir adapter in skimmer plate and attach elbow supplied
between adapter and control valve.
5. Attach the free end of the pool hose to the free end of the adjustable valve.
6. Adjust the control valve between settings 1 and 4.
7. Switch on the pump and the Acrobat will start to operate.
* WARNING!! DO NOT DETACH POOL CLEANER WHILE PUMP IS
RUNNING
* TIP!!!!! Backwash and rinse filter and clear skimmer box and pump
basket before operating your new Acrobat pool cleaner.
* TIP!!!!! Backwashing and cleaning the skimmer basket or sock and
pump basket should be
done weekly.
