Acromag IP1K110 Series User Manual Download | Manualshive

Page: 19 / 25

background image

SERIES IP1K110 INDUSTRIAL I/O PACK RECONFIGURABLE DIGITAL I/O MODULE
__________________________________________________________________________________________

- 19 -

Acromag, Inc. Tel:248-295-0310 Fax:248-624-9234 Email:solutions@acromag.com

http://www.acromag.com

TRANSITION MODULE: MODEL TRANS-GP

Type: Transition module for AVME9630/9660 boards.
Application: To repeat field I/O signals of IP modules A through

D for rear exit from VME card cages.  This module is
available for use in card cages which provide rear exit for I/O
connections via transition modules (transition modules can
only be used in card cages specifically designed for them).  It
is a double-height (6U), single-slot module with front panel
hardware adhering to the VMEbus mechanical dimensions,
except for shorter printed circuit board depth.  Connects to
Acromag termination panel 5025-552 from the rear of the
card cage, and to AVME9630/9660 boards within card cage,
via flat 50-pin ribbon cable (cable Model 5025-551-X).

Schematic and Physical Attributes: See Drawing 4501-465.
Field Wiring: 100-pin header (male) connectors (3M 3433-D303

or equivalent) employing long ejector latches and 30 micron
gold in the mating area (per MIL-G-45204, Type II, Grade C).
Connects to Acromag termination panel 5025-552 from the
rear of the card cage via flat 50-pin ribbon cable (cable Model
5025-551-X).

Connections to AVME9630/9660: 50-pin header (male)

connectors (3M 3433-1302 or equivalent) employing long
ejector latches and 30 micron gold in the mating area (per
MIL-G-45204, Type II, Grade C). Connects to
AVME9630/9660 boards within the card cage via flat 50-pin
ribbon cable (cable Model 5025-551-X).

Mounting: Transition module is inserted into a 6U-size, single-

width slot at the rear of the VMEbus card cage.

Printed Circuit Board: Six-layer, military-grade FR-4 epoxy glass

circuit board, 0.063 inches thick.

Operating Temperature: 0 to +70

°

C.

Storage Temperature: -25

°

C to +85

°

C.

Shipping Weight: 1.25 pounds (0.6Kg) packaged.

«
...
17
18
19
20
21
...
»

Summary of Contents for IP1K110 Series


























Reviews:

No comments

Related manuals for IP1K110 Series

Brand: Eaton Pages: 18

Cutler-Hammer IQ DP-4000

Brand: Eaton Pages: 87

Brand: R&M Pages: 53

Brand: FARFISA INTERCOMS Pages: 36

NEOS DIGITAL KVD-2 S1 COAX

Brand: Auta Pages: 4

TRANSITIONS Angled Entry Mat

Brand: EZ-ACCESS Pages: 4

Brand: WEST Pages: 2

Brand: The Fisher Pages: 20

Brand: ICP DAS USA Pages: 21

HERCULES 6.5 PLUS

Brand: Fenix Pages: 24

Brand: SRS Labs Pages: 7

Genie BBSKETDL15B-1001

Brand: Terex Pages: 69

duplex DC -24 II

Brand: JETI model Pages: 52

Brand: HOLOVISION Pages: 4

Brand: Acces Pages: 20

Brand: Slinex Pages: 8

Brand: Dahua Pages: 36

Brand: National Instruments Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands