Model TT235-0600
RTD/Resistance Thermometer Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 34 -
http://www.acromag.com
[
34
]
https://www.acromag.com
Enclosure & Physical
General purpose plastic enclosure for mounting on 35mm “T
-
type” DIN rail.
Dimensions
: Width = 12.5mm (0.5 inches), Length = 114.5mm (4.51 inches), Depth =
99.0mm (3.90 inches). Refer to Mechanical Dimensions drawing.
I/O Connectors:
Removable plug-in type terminal blocks rated for 12A/250V; AWG
#26-12, stranded or solid copper wire.
Program Connector:
USB Mini B-type, 5-pin. See USB Interface.
Case Material:
Self-extinguishing polyamide, UL94 V-0 rated, color light gray.
General purpose NEMA Type 1 enclosure.
Circuit Board:
Military grade fire-retardant epoxy glass per IPC-4101/98.
DIN-Rail Mounting:
Transmitter is normally mounted to 35x15mm, T-type DIN rails.
Refer to the DIN Rail Mounting & Removal section for more details.
Shipping Weight:
0.5 pounds (0.22 Kg) packed.
Environmental
These limits represent the minimum requirements of the applicable standard, but this
product has typically been tested to comply with higher standards in some cases.
Operating Temperature:
-40
C to +80
C (-40
F to +176
F).
Storage Temperature:
-40
C to +85
C (-40
F to +185
F).
Relative Humidity:
5 to 95%, non-condensing.
Isolation:
Input/USB, output/power circuits are isolated from each other for
common-mode voltages up to 250VAC, or 354V DC off DC power ground, on a
continuous basis (will withstand 1500VAC dielectric strength test for one minute
without breakdown). Complies with test requirements of ANSI/ISA-82.01-1988 for
voltage rating specified.
Installation Category:
Suitable for installation in a Pollution Degree 2 environment
with an Installation Category (Over-voltage Category) II rating per IEC 1010-1 (1990).
Shock & Vibration Immunity:
Conforms to: IEC 60068-2-6: 10-500 Hz, 4G, 2
Hours/axis, for sinusoidal vibration; IEC 60068-2-64: 10-500 Hz, 4G-rms, 2 Hours/axis,
for random vibration, and IEC 60068-2-27: 25G, 11ms half-sine, 18 shocks at 6
orientations, for mechanical shock.
Electromagnetic Compatibility (EMC)
Minimum Immunity per BS EN 61000-6-1
1.
Electrostatic Discharge Immunity (ESD), per IEC 61000-4-2
2.
Radiated Field Immunity (RFI), per IEC 61000-4-3
3.
Electrical Fast Transient Immunity (EFT), per IEC 61000-4-4
4.
Surge Immunity, per IEC 61000-4-5
5.
Conducted RF Immunity (CRFI), per IEC 61000-4-6
Class B Product with Emissions per BS EN 61000-6-3
1.
Enclosure Port, per CISPR 16
2.
Low Voltage AC Mains Port, per CISPR 14, 16
3.
DC Power Port, per CISPR 16
4.
Telecom / Network Port, per CISPR 22
