BusWorks Model XT1533-000
4 CH Current 4 CH Digital I/O w/USB & Profinet
Acromag, Inc. Tel: 248-295-0880
- 4 -
http://www.acromag.com
- 4 -
http://www.acromag.com
GETTING STARTED
DESCRIPTION
Symbols on equipment:
Means “Refer to User’s Manual
(this manual) for additional
information”.
The XT1533-000 is Profinet network I/O module for interface and control of up to
four channels of DC current output and four channels of sourcing digital I/O. These
modules provide output isolation from the network and power. Channels are setup
and calibrated, and their operation checked offline, over a USB interface to any
Windows-based PC (Windows XP and later versions only).
Key Features
•
CE Approved, UL/cUL Class I, Division 2 Approved.
•
Designed and Manufactured with High Quality/High Reliability with AS9100
(Aerospace Quality)/ISO9001.
•
Combination of Quad DC Current Output (0-20mA/4-20mA) and Quad
Sourcing Digital I/O.
•
Profinet Protocol Support.
•
Conveniently setup and configured w/ Windows software via USB.
•
High-Density 22.5mm wide package with pluggable, front-facing terminals.
•
Dual Isolated, auto-crossing, 10/100Mbps Ethernet ports w/ Auto-Negotiation
offers a convenient
“daisy chain” network connection
saving switch ports.
•
Operation & Diagnostic LED indicators aide trouble-shooting.
•
Bus Power Ready for Clean Wiring along the DIN Rail, and/or for Redundant
Power Connection.
•
High 1500VAC Isolation between output channels (combined as a group), the
network, and power.
•
Outputs & Digital I/O, power, network, and USB ports are all transient
protected.
•
Wide-range DC power input from 12-32V.
•
Wide ambient temperature operation from -40°C to +60°C.
•
Thoroughly Tested and Hardened For Harsh Environments.
•
Withstands High Shock (25G) and Vibration (4G).
•
Model XT-1533-000 is ATEX Certified for Explosive Atmospheres.
II 3 G Ex nA IIC T4 Gc -40
o
C
≤
Ta
≤
+60
o
C
DEMKO 15 ATEX 1561X
Application
This module is designed for high-density mounting on T-type DIN rails. XT models
may be mounted side-by-side on 22.5mm centers and can plug-together for
modular expansion with a shared power connection along the DIN rail. This model
provides 4 channels of DC current output and 4 channels of sourcing digital output
with tandem active-high digital inputs, all monitored and controlled via a
10/100Mbps Ethernet interface using the Profinet application protocol. Units are
conveniently setup and configured for network operation via a USB connection to a
host computer running Acromag configuration software.
!
