background image

 

7

Safety

−  Do not open the housing; instead, have a qualified professional

  perform the repairs. Contact the service address provided on 

  the warranty card. Liability and warranty claims are waived

  in the event of repairs or conversions performed by the user,

  improper connection of the device or incorrect operation.
−  Only parts that comply with the original device data may be 

  used for repairs. Electrical and mechanical parts, which are 

  essential for providing protection against sources of danger, 

  are located in this laminator.
−  Do not operate the laminator with an external timer or   

  separate telecontrol system.
−  Do not immerse the laminator or the mains cord or mains  

  plug in water or other liquids.
−  Never touch the mains plug with damp hands.
−  Do not perform any other work (such as cleaning) on the   

  laminator while it is operating.
−  Never pull the mains plug out of the socket by the mains cord;

  instead, always do so by taking hold of the mains plug.
−  Never use the mains cord as a carrying handle.
−  Keep the laminator, mains plug and mains cord away from 

  open flames and hot surfaces.
−  Lay the mains cord so that it does not pose a tripping hazard.
−  Do not kink the mains cord and do not lay it over sharp edges.
−  Only use the laminator in indoor areas. Do not use them in  

  wet rooms or in the rain. 

 

−  Never store the laminator so that it is at risk of falling into a

  bath tub or washbasin.
−  Never reach to retrieve the laminator if it has fallen in water. 

  In such a case, immediately disconnect the mains plug.
−  Make sure that children do not insert any objects into the  

 laminator.

ACR-003_OL355_manual_GB.indd   7

08.05.2019   10:59:25

Summary of Contents for AL3600





















Reviews: