AR-B9673 User’s Guide
23
Save & Exit Setup
This option allows you to determine whether to accept the modifications or not. If you type .Y., you will quit the
setup utility and save all changes into the CMOS memory. If you type .N., you will return to Setup utility.
Load Optimized Defaults
This option allows you to load the default values to your system configuration. These default settings are optimal
and enable all high performance features.
To load SETUP defaults value to CMOS SRAM, enter .Y. If not, enter .N.
Exit Without Saving
Select this option to exit the Setup utility without saving the changes you have made in this session. Typing .Y.
will quit the Setup utility without saving the modifications. Typing .N. will return you to Setup utility.
5.9 BIOS UPDATE
The BIOS program instructions are contained within computer chips called FLASH ROMs that are located on your
system board. The chips can be electronically reprogrammed, allowing you to upgrade your BIOS firmware
without removing and installing chips.
The AR-B9673 provides the FLASH BIOS update function for you to easily to update to a newer BIOS version.
Please follow these operating steps to update to new BIOS:
Step 1:You must boot up system into MS-DOS mode first. Please don’t detect files CONFIG.SYS and AUTOEXEC.BAT.
Step 2:In the MS-DOS mode, you should execute the AWDFALSH program to update BIOS.
Step 3:Follow all messages then you will update BIOS smoothly.
