Configuration level
Configuration parameters
24
Operating manual MIR-491
Name
Value range Description
Default
rnG.L
-1999...9999
X0 (low limit range of control)
1
0
rnG.H
-1999...9999
X100 (high limit range of control)
1
900
CYCL
Characteristic for 2-point- and 3-point-controllers
0
0
standard
1
water cooling linear
2
water cooling non-linear
3
with constant cycle
tunE
Auto-tuning at start-up
0
0
At start-up with step attempt, at set-point with impulse
attempt
1
At start-up and at set-point with impulse attempt. Setting for
fast controlled systems (e.g. hot runner control)
2
Always step attempt at start-up
Strt
Start of auto-tuning
0
0
Manual start of auto-tuning
1
Manual or automatic start of auto-tuning at power on or
when oscillating is detected
Adt0
Optimization of T1, T2
(only visible with BlueControl!)
0
0
Automatic optimization
1
No optimization
1
rnG.L
and
rnG.H
are indicating the range of control on which e.g. the
self-tuning is refering
InP.1
Name
Value range Description
Default
S.tYP
Sensor type selection
1
0
thermocouple type L (-100...900°C) , Fe-CuNi DIN
1
thermocouple type J (-100...1200°C) , Fe-CuNi
2
thermocouple type K (-100...1350°C), NiCr-Ni
3
thermocouple type N (-100...1300°C), Nicrosil-Nisil
4
thermocouple type S (0...1760°C), PtRh-Pt10%
5
thermocouple type R (0...1760°C), PtRh-Pt13%
6
thermocouple type T (-200...400°C), Cu-CuNi
7
thermocouple type C (0...2315°C), W5%Re-W26%Re
8
thermocouple type D (0...2315°C), W3%Re-W25%Re
9
thermocouple type E (-100...1000°C), NiCr-CuNi
10
thermocouple type B (0/100...1820°C), PtRh-Pt6%
18
special thermocouple
20
Pt100 (-200.0 ... 100,0 °C)
21
Pt100 (-200.0 ... 850,0 °C)
22
Pt1000 (-200.0 ... 200.0 °C)
