The ACT 433RX Receiver Reader is a 433.92MHz radio device reader. The ACT 433RX readers can be used
with the ACT433 family of transmitters. The receiver will operate from a few metres up to 50 metres
depending on environmental conditions. It is rated for IP67 and can be surface or flush mounted.
It supports Clock and Data and Wiegand formats. Two ACT 433RX Readers can be controlled by a single
transmitter. Set the dipswitch on one receiver to enable the LEFT button only. Set the dipswitch on the
second receiver for the RIGHT buttton only.
1
2 3 4
ON
ACTpro Controller
SENSE
CLOCK
DATA
+5V
0V
RED
GREEN
Card/Prox Reader
SENSE
CLOCK
DA
TA
GREEN
RED
0V
+5/12v
Maximum Distance from Reader to Controller is
30metres at +5V and 100metres at +12V.
All Dipswitches normally ON (Up).
DIP ON OFF
1 Clock and Data Wiegand
2 Left Button Enabled Left Button Disabled
3 Right Button Enabled Right Button Disabled
4 Not Used Not Used
The ACT 433RX Receiver may be connected to any of
the ACTpro range of controllers as well as ACTSmart2
1080 and ACTSmart2 1090.
Once power is applied to the ACTpro 433 Receiver
the front LED illuminates RED. When a button is
pressed on the transmitter the LED illuminates GREEN.
The unique tranmitter number is sent to the controller
whereupon access is granted or denied.
Unit C1, South City Business Centre, Tallaght, Dublin 24, Ireland.
Phone: +353 1 466 2570. Fax: +353 1 452 0427. UK LoCall 0845 300 5204 E-mail: sales@accesscontrol.ie Web: www.accesscontrol.ie
ACT 433RX Receiver Reader
Technical Specifications
Operating frequency
433.92MHz
Modulation
FSK
Supply
5V - 12 V DC
Current consumption
60mA
Operating temperature
-20°C to +70°C
Overall dimension
109 x 100 x 24 mm
Weight
106 gr.
18-00053 Issue 2
