ACT ACT-HDC 112 SH User Manual Download

Page: 5 / 5

3-4 Device Info

：

Function 7-10 Device Info is to show the information of the

HDD you have installed.

3-5 System Info

：

Function 7-11 System Info is to show the information of

the firmware of the system.

3-6 Load Default

：

Function 8-05 Load Default is to make all changed settings

return to defaults. After pressing ESC about 2 second,

you can choice this function.

3-7 Erase HD Data :

Function 7-12 Erase HD Data is to delete all data of the

source HDD; when you execute this function, it is

unrecoverable, please make sure the HDD is not your

original HDD that you want to copy..

Summary of Contents for ACT-HDC 112 SH

Page 2: ...the power is turning off and then turn on the power to copy After copying completely first turn off the power and then take away your HDD from ACT HDC 112 SH 5 Before copying please check again your...

Page 3: ...s or menus 3 It is used to scroll down functions or menus 4 It is used to execute a selected function 5 It is used to cancel a selected function 2 2 Main Functions 2 2 1 Copy HD Function 1 Copy is to...

Page 4: ...you change the default settings 2 2 8 Adv setup Function 8 Adv setup lets you change the system configuration 3 General Functions 3 1 Prescan Before copying or fail copying you can use this function t...

Page 5: ...e of the system 3 6 Load Default Function 8 05 Load Default is to make all changed settings return to defaults After pressing ESC about 2 second you can choice this function 3 7 Erase HD Data Function...