ACT 5e prox Operating and Installation Manual
Rev 1.0
Programming Summary
Code
Function
Default
0
Change PIN code
1234 – User 1, 9999 - Programming Code
1
Set Toggle Mode
Off (Timed Relay)
2
Set Door Relay Time
5 seconds
5
Add User Card
6
Delete User’s Card
7
Delete Card Number
30
Card or PIN
On
31
Card and PIN
Off
32
Card and any PIN
Off
40 Permanent
Backlight
On
41 Auto
Backlighting
Off
80
Check PIN User
81
Check Card User
ACT 5e prox Operation
The ACT 5e prox is a simple, easy-to-use access control unit combining digital keypad and
proximity technology. The unit supports up to 50 users, each with a unique PIN code and proximity
card/fob. Each unit is contained in rugged polycarbonate housing, with stainless steel keys and
potted electronics, allowing for indoor and outdoor installation.
Keypad backlighting enhances the
ACT 5e prox functionality at night or in poor light conditions.
Programming the unit is achieved via the keys, LED and buzzer. Cards and PIN codes can be
programmed into the ACT 5e prox very quickly.
ACT recommends that Users and their
associated PIN and Card are recorded in the User List at the end of the manual
. Make copies
of this sheet and enter each Users details on it. This will allow users to be deleted later on, even if
a card is lost or a user forgets their PIN code.
Blank User Details forms can be downloaded
from the Resource Centre on the ACT website, www.accesscontrol.ie
A valid card or PIN will allow access. For maximum security, the unit may be programmed to
require all users to enter a PIN code after presenting a card.
- 4 -