12
ACT Cartridge Dust Collector
Gasket End
Cartridge
Filter
Filter
Access
Door
Maintenance
Cartridge Filter Replacement
1. Turn off the fan and wait until the down time cleaning
cycle is completed.
2. Lock out/ tag out power to the collector and fan.
3. Open the filter access door by pulling and lifting the
cam handle.
4. Once door is loose, lift it off the securing hooks and set
it down.
5. Reach into the collector and pull out all of the filters.
(Or work your way top down to avoid dust from the
upper filters falling down on to the new filters).
6. Once filters are removed, install new filters. Make sure
that the gasket end goes into the collector first.
7. Reinstall the filter access door.
Open
Close
Filter Access Door
(Opening and Closing)
