- 23: Increase value.
- 24: Validate the configuration.
b) Control unit back panel
The power receptacle (Fig. 2-1) with its grounding pin is used to connect the P
IEZOTOME
2 to the power
supply using a plug-in power cord.
The footswitch connector (Fig. 2-2) is used to connect the P
IEZOTOME
2 to the multifunction control
footswitch.
The fan (Fig. 2-3) protected by a metal grille, keeps the P
IEZOTOME
2 at its optimum performance level.
The bracket holders (Fig. 2-4) are used to install the brackets.
The power switch (Fig. 2-5) is used to switch the device ON or OFF.
c) Control unit sides
The pump housings (Fig. 1-9) are designed to accommodate SATELEC irrigation line cassettes.
The irrigation cassettes are installed by lifting the pump covers and inserting the cassettes horizontally
into the cassette housings.
d) Front panel
The two connectors are designed to accept the connector of the N
EWTRON
/ N
EWTRON
LED cord or the
connector of the P
IEZOTOME
2 / P
IEZOTOME
2 LED handpiece cord.
e) Control footswitch
The access to a large number of functions on the control footswitch allows the practitioner to work in a
perfectly sterile environment, avoiding the risk of cross-contamination.
Once the various settings have been adjusted, the user has no further need to touch the keypad.
Depending on the mode, the control footswitch buttons have different functions.
P
IEZOTOME
mode
:
Footswitch button definition (Fig. 8-1 to 5).
- 1: Ultrasonics control (ON/OFF or progressive).
- 2: Flush/prime.
- 3: Change program (D1 to D4).
- 4: Irrigation ON/OFF.
- 5: Select active handpiece.
N
EWTRON
mode
:
Footswitch button definition (Fig. 8-1 to 5).
- 1: Ultrasonics control (ON/OFF or progressive).
- 2: Flush/prime.
- 3: Change program (Soft to Boost).
- 4: Irrigation ON/OFF.
- 5: Select active handpiece.
Summary of Contents for Satelec Implant Center 2
