Up- and Downloading Configuration Data
and Reports
Acterna provides an optional up- and download software (order
code 2700-PC) for use with the BAT Module. The software is
based on an MS-Excel sheet containing macros.
Using the different tables of the MS-Excel sheet, you can enter
all relevant parameters of the different base stations so that you
have them available at a glance. If run on a laptop PC, you can
simply click on a base station entry and have access to all infor-
mation on site. The software also enables you to load these
base station configuration data from the PC to the BAT Module
and to transfer test results back to the PC.
Service and Calibration
The BAT can only be repaired by Acterna’s trained service engi-
neers. Each repair requires a new calibration of the BAT to
ensure measurement accuracy. The BAT should be recalibra-
ted at least once a year. The cables and adapters should also
be sent in for inspection; they will be checked and exchanged
for new ones if damaged.
Replacement parts (cables, adapter cables and cable binders)
can be ordered directly from Acterna:
N to N cable, 2 m (6 ft), blue cap
Order code CB-382811
N to N cable, 2 m (6 ft), yellow cap
Order code CB-382810
N to SMA adapter cable, blue
Order code CB-382819
N to SMA adapter cable, yellow
Order code CB-382818
Removable cable binder (incl. 4 pcs)
Order code AC-770163
Antenna with TNC connector, cellular Order code 1019-00-1052
Antenna with TNC connector, PCS
Order code 1019-00-1039
Replacement battery
Order code BA-014081
