1-1
1.3 BASIC CONNECTIONS
Follow the procedures below to connect the IP device to the respective
apparatuses.
1.
Connect this IP device’s ethernet port to an Ethernet (RJ45/ M12
connector). IP device has only PoE built-in, you must regard it as a PD and
connect it directly to a PSE device like PoE switch.
2.
Connect a PC to the Ethernet hub
1
Quick Tour
NOTE:
You may find a support package for help you getting familiar
with PoE. Please visit our web site, and get the support document
TS-00040.
2
