Installation Guide
Waterproof Solution Using the “Pigtail”
The camera and the pre-
installed network cable, “pigtail”, are resistant to salt, water, weak acid,
alcohol, oil, grease and other common solvents. However, users must ensure that the cable
connection and the network side cable itself are also protected from different environmental
factors.
When using a Power-over-Ethernet (PoE) switch or injector, connecting the network cable
through the “pigtail” is recommended. In this case, there are two waterproofing methods.
Bundled Accessory
Description
Female
Cable Gland
Use this solution when connecting an Exterior-grade
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch or injector. See
on page 14.
Female
Conduit Gland
Use this solution when connecting a standard indoor
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch / injector. A flexible
conduit (trade size 1/2”) is required to house the Ethernet
How to Use the Female Conduit Gland
page 17 .
NOTE:
The flex conduit is not included in the package
and must be purchased separately.
If other devices, such as a power adapter, digital or audio input or output devices will be
connected to the camera, or in some cases, users may require the use of specific cables with
customized length, use the back connectors of the camera to connect the cables. See the
camera Hardware Manual downloadable from our website (
) for more cabling
information.
