www.acti.com
Hardware Manual
27
Step 5: Connect the Cables and Optional Accessories
Insert a memory card into the camera card slot (if necessary).
Connect the network cable, power adapter, and other cables, such as DI/DO, etc. (if any)
to the camera.
Step 6: Install the Camera
1. Align the camera base hooks to the holes on the bracket and then insert the camera
through the bracket.
NOTE:
Take note that the network cable must be bent to insert the camera into the mount. If
the network cable you are using is not flexible or too rough to be bent, it is
recommended to use the bundled network extension cable (included in the camera
package). The bundled network extension cable is flexible enough to be bent and
makes it easy to insert the camera through the mount.
Or, if you can access the inside of the ceiling, you may mount the camera first and
then connect the cables.
