www.acti.com
Hardware Manual
10
Physical Description
No.
Item
Description
1
Reset Button
The reset button is used to restore the factory default settings
of the camera, including the administrator
’s password.
To reset the camera, do the following:
a.
Loosen the four (4) screws using the bundled hex
screwdriver to remove the cover.
b.
Press and hold the reset button for at least 5 seconds or
until the Power LED goes off.
2
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
How to Install the Memory Card
on page 38 for more
information.
NOTE:
Supoorts microSDHC and microSDXC cards.
3
Power LED
The Power LED lights red when the camera is powered up.
4
Audio Output
This jack connects to an audio output device, such as a
on page
