www.acti.com
Hardware Manual
38
Other Accessories
How to Install the Memory Card
If there is a need to install a memory card for local storage recording, insert the memory card to
the camera first before mounting the camera. Follow the procedures below:
1.
After opening the cover, locate the memory card slot on the camera.
2.
Insert the memory card into the memory card slot with the metallic contacts facing the
camera.
3.
Push the card until it clicks into place.
4.
Close the camera cover.
How to Remove the Memory Card
In case there is a need to remove the card, make sure to access the camera Web Configurator to
safely “unmount” the card first (see the camera Firmware Manual for more information). Once
unmounted from the firmware, push the card to eject it from the slot.
