Standalone NVR Quick Installation Guide
9
SELECT STORAGE DRIVES
1. Go to
Setup
page and then
Storage
tab.
ADD CAMERAS
1. Go to
Setup
page and then
Devices
tab.
Search Cameras
Use “
Hybrid Search
” to auto-search
the network for all cameras, or
“
ONVIF Search
” for
ONVIF-compliant cameras of any
brand. After selecting your desired
cameras, click “
Apply
”.
Add Camera Manually
If you are adding a camera located
in another network, use “
Add
Camera Manually
”. Fill in
Media
Type
,
Protocol
,
IP Address
,
HTTP
Port
,
Account
and
Password
. Finally,
click “
Get Device Settings
” and then
“
Apply
”.
To find ONVIF-compliant
cameras, input the correct
account and passowrd first,
and then click
to start
searching.
2. Click “
Add
”.
3.
Choose a search
method based
on your network
environment and
camera brand.
2. On
Disk Drive
List
, de-select C
Drive, and select
other storage
drives.
3.
Click “
Apply
“.
