www.acti.com
Installation Guide
18
Automatically Obtain an IP Address
To automatically obtain an IP address, do the following:
1.
Press
1 2 3 4 5 6
2.
Press
3
[Parameters (1)]
1
[Node ID]
3.
Press
four (4) times to scroll through the submenu option until you see
ENABLE
DHCP
on the screen.
4.
On the
ENABLE DHCP
screen, press
1
to select
Enable DCHP
. The device will
automatically restart and obtain an IP address from the connected server.
How to Check the IP Address
When the device has obtained an IP address automatically, you may need to check and know
what that IP address is. To check for the IP address, do the following:
1.
Press
1 2 3 4 5 6
2.
Press
3
[Parameters (1)]
1
[Node ID]
3.
Press
four (4) times to scroll through the submenu option until you see
ENABLE
DHCP
on the screen. This screen also shows the current IP address of the device.
4.
Press
2
to exit the submenu, then press
repeatedly to go back the previous
submenu screens.
5.
Press
6
to
Quit
or close the menu.
Useful Shortcuts
How to Exit the Menu
Press
repeatedly or select the corresponding number of
QUIT
as shown on some of the
screens.
How to Change the Master Code
1.
Press
1 2 3 4 5 6
2.
Press
5
[Tools]
2
[Master Code]
3.
Press the keypad to enter the new 6-digit master code.
4.
The screen will automatically show SUCCEEDED after pressing the last digit of the code.
How to Lock and Unlock the Keypad
Press
and
at the same time to lock or unlock the keypad.
