www.acti.com
User
’s Manual
23
NOTE:
The employee ID should be between 1 and 99999999. The employee ID should
not start with 0 and should not be duplicated.
3. Tap the
Name
field and input the user name on the soft keyboard.
NOTES:
Numbers, upper case letters, lower case letters, and special characters are
allowed in the user name.
Up to 32 characters are allowed in the user name.
4. Tap the
Card
field and input the card No.
Option 1:
Input the card No. manually.
Option2:
Swipe the card over the card swiping area to get the card No.
NOTES:
The card No. cannot be empty.
Up to 20 characters are allowed in the card No.
The card No. cannot be duplicated.
5. Tap the
Password
field and create a password and confirm the password.
NOTES:
The Card No. cannot be empty.
Up to 20 characters are allowed in the Card No.
The Card No. cannot be duplicated.
6. Tap the
Face Picture
field to enter the face picture adding page. Follow the steps below
to add the user’s face picture:
a. Position your face looking at the camera.
NOTE:
Make sure your face is in the face picture outline when adding the face
picture.
After completely adding the face picture, a captured face picture will display on
the page.
NOTE:
Make sure the captured face picture is in good quality and is accurate.
For more details about adding face pictures, see
on page 27.
b. Tap
Save
to save the face picture. Or tap
Try Again
and adjust your face
position to add the face picture again.
NOTE:
The maximum duration for adding a face picture is 15 seconds. You can
check the remaining time for adding a face picture on the left of the page.
