www.acti.com
USER’S MANUAL
15
Step 2: Configure Wired Network Settings
1.
On the
Home Menu
, tap
Comm.
to access the
Communication Settings
.
2.
Select
Wired Network
.
3.
Set the
IP address
,
Subnet Mask
and
Gateway
.
Enable
DHCP
, the system will assign IP address, subnet mask, and gateway
automatically.
Disable DHCP, you will need to manually set the IP address, subnet mask, and
gateway.
NOTE:
The device IP address and the computer IP address should be in the same IP
segment.
4.
Set the DNS parameters. You can enable
Auto Obtain DNS
, set the preferred DNS
server and the alternate DNS server.
