www.acti.com
U
SER’S MANUAL
11
Wiring Common Devices
When connecting to a Wiegand Card Reader, set the device Wiegand direction as
Input
.
When connecting to an access controller, set the device Wiegand direction as
Output
to
transmit authentication information to the access controller.
The recommended power supply is 12 VDC, 2 A. The recommended power supply for
door lock is 12 V, 1 A. The recommended power supply for Wiegand card reader is 12 V,
1A.
Do not wire the device to the electric supply directly.
Wiring Secure Door Control Unit
The secure door control should connect to an external power supply separately. The
suggested external power supply is 12V, 0.5A
