62 - SmarTach
®
for Dangerous Goods Vehicles -
Copyright
©
2005 ACTIA
English
5.2 Instructions for Use in the Presence of an
Explosive Atmosphere
Before SmarTach
®
and sensor may be exposed to an explosive
atmosphere, you must also comply with the following rules of
use relating to SmarTach
®
and to the vehicle power:
1.
Ensure that all operations involving the printer and the smart
card readers are complete. Specifically, ensure that the
reader slots 1 and 2 are closed, and that at least 2 minutes
have passed since the last printout.
2.
Turn the ignition switch off; SmarTach
®
goes into standby
mode while verifying whether card and printer operations are
indeed complete. A specific screen is displayed according to
the case.
• If a reader slot is open, the following screen appears.
Turn the ignition switch on and carry out the necessary action
to close the reader slots.
• If a printout was just completed, the following screen
appears.
Wait until the required time lapse has passed.
• When everything is normal, the following screen appears.
All conditions have been satisfied and you may proceed to the
following steps.
3.
Turn off the battery master switch to shut-off power to nearly
all the vehicle systems. SmarTach
®
maintains all its
regulatory monitoring functions, but it is not able to perform
its power functions, nor those relating to the driving of the
vehicle.
The three actions cited above must be carried out
in the given order.
In particular, the battery master switch must
never be open before the ignition switch has
been turned off.
Summary of Contents for SmarTach
