© Action Drone, Inc. All Rights Reserved.
|
AD2 User Manual V1-052316
13
SYSTEM OPERATIONS
Advanced Settings
Recommended for advanced users only. Detailed manuals can be found on the FrSky website for Taranis radios:
http://www.frsky-rc.com/download/index.php?sort=Manual&cate_id=20&pro_id=0
Manual includes: Internal RF Mode setup, Channel range setup, Receiver number setup, Bind, Failsafe Mode setup,
Range setup, Flying safety, SD Memory card handing, and battery safety handling instructions.
Gains
We have programmed the “S1” knob for Gain
Controls. This gives the ability to change how docile
or aggressive the AD2 will fly with respect to your
joystick input. This is useful for changing your AD2
handling in flight to adjust your flying skill levels with
the current flight conditions, etc.
In all AD systems, we have accurately pre-
programmed the Gains percentages according to our
Action Drone USA performance standards.
IMPORTANT NOTE: If you adjust the Gains without
a full understanding of the mechanics, it may cause
your AD2 to drift (yaw), upon flight.
Channel Range
The internal RF module of Taranis X9D Plus supports up to 16 channels. The channel range is configurable, and
needs to be double checked before use.
Receiver Number
When you create a new model, the system will assign you a receiver number automatically, but this can be easily
changed. The range of the receiver number is 00-63, with the default number being 01 (00 is not recommended).
Once the receiver is set to the desired number and is bound to the Taranis X9D Plus, the bind procedure does not
need to be repeated unless the receiver number is changed, In this case, either set the receiver number to the
previous one, and repeat the bind procedure.
Bind / Pair Radio
The Radio will be pre-programmed and bound to
the AD2’s receiver. Bind refers to Taranis X9D Plus
Binding Mode. Move the cursor to “Bind”, press
ENTER button, the cursor will flash and the speaker
will beep to remind you that the RF module has
entered the Bind Mode. Then put your receiver into
Binding Mode and finish the bind procedure (refer
to the receiver’s manual for details). Press Enter or
EXIT to exit.
NOTE:
Customizations and alterations to these radio functions beyond stock delivery setup is to your own
discretion. Detailed manuals can be found on the FrSky website for Taranis radios: http://www.frsky-rc.com/
download/index.php?sort=Manual
MODEL SELECTION
01
02
AD1
03
04
05
06
07
30618 bytes free 1/13
109
272
MODEL SELECTION
01
02
AD1
03
04
05
06
07
30618 bytes free 1/13
109
272
Aircraft & Gimbal Operations
Radio Controller
Flight Controllers, Groundstation
Software, Maintenance
Battery Use
Cameras & Sensors
Figure 2.12: Radio Gains Knob
Figure 2.13: Radio Bind
< BACK TO CONTENTS
< BACK TO CONTENTS
