Console
Button Functions
MODE
To dislay value for TIME, DIST, CAL, PULSE
RESET
Return to main function in stop mode and reset all
values
to
zero.
START/STOP To start or stop training
RECOVERY
To test heart rate recovery status.
UP & DOWN To select training mode and adjust function value
KM/ML
(in the back of console) To select Metric or
English
of
SPEED/DISTANCE.
BODY FAT
To start body fat measurement.
Display functions
TIME
Count up: Time will count up from 00:00 to maximum 99:59 with 1 second increment.
Count down: If training with preset Time, Time will count down from preset to 00:00.
SPEED
Display current training speed from 0.0 to maximum 99.9 km or ml.
RPM
Display current training rotation per minute.
DISTANCE
Count up: Distance will count up from 0.00 to maximum 99.90 with 0.1 KM or ML increment
Count down: If training with preset target, Distance will count down from preset to 0.00.
CALORIES
Count up: Calories will count up from 0 to maximum 990 with 1 cal increment.
Count down: If training with preset target, Calories will count down from preset time to 0.
PULSE
To display your current heart beat when both pulse sensors has been touched.
The monitor will detect your heart rate through handgrip sensors or chest belt (with the plug-in
receiver has been attached)
WATT
Display current training watt value.
RECOVERY
After exercising for a period of time, keep holding on handgrips and press RECOVERY
button. All function display will stop except “TIME” starts counting down from 00:60 to
00:00. Screen will display your heart rate recovery status with the F1 to F6 (F1=best, F6=
worst). User may keep exercising to improve the heart rate recovery status.
(Press the RECOVERY button again to return the main display.)
TEMP
Room temperature in stand-by mode.
CALENDAR
Screen will display year/month/day in stand-by mode.
CLOCK
Screen will display time in stand-by mode.
10
